Tunnel Menggunakan EoIP

Setelah melihat teman kebingungan untuk melakukan Tunnel dengan menggunakan EoIP, jadinya saya berkeingian untuk membuat corat-coretan sedikit.

Dengan asumsi kita mempunyai router induk di jakarta dan beberapa kantor cabang di beberapa daerah;

Setting Ro. Jakarta
[elang@Pus1nk-JKT] > /interface set ether1 name=ether1<->WAN
[elang@Pus1nk-JKT] > /interface set ether2 name=ether2<->LAN
[elang@Pus1nk-JKT] > /ip address add address=10.10.10.6/30 interface=ether1<->WAN
[elang@Pus1nk-JKT] > /ip address add address=172.21.0.1/22 interface=ether2<->LAN
[elang@Pus1nk-JKT] > /ip route add gateway=10.10.10.5
[elang@Pus1nk-JKT] > /ip dns set primary-dns=10.10.10.254 secondary-dns=10.10.10.252
[elang@Pus1nk-JKT] > /ip dns set allow-remote-requests=yes
(tunnel-BDG)
[elang@Pus1nk-JKT] > /interface eoip add name=EoIP-JKT<->BDG remote-address=20.20.20.2 tunnel-id=22
[elang@Pus1nk-JKT] > /ip address add address=10.20.30.1/30 interface=EoIP-JKT<->BDG
[elang@Pus1nk-JKT] > /ip route add dst-address=172.21.0.0/22 gateway=10.20.30.2
(tunnel-SBY)
[elang@Pus1nk-JKT] > /interface eoip add name=EoIP-JKT<->SBY remote-address=10.10.10.11 tunnel-id=31
[elang@Pus1nk-JKT] > /ip address add address=10.20.30.5/30 interface=EoIP-JKT<->SBY
[elang@Pus1nk-JKT] > /ip route add dst-address=172.21.0.0/22 gateway=10.20.30.6

Setting Ro. Bandung
[elang@Pus1nk-BDG] > /interface set ether1 name=ether1<->WAN
[elang@Pus1nk-BDG] > /interface set ether2 name=ether2<->LAN
[elang@Pus1nk-BDG] > /ip address add address=20.20.20.2/30 interface=ether1<->WAN
[elang@Pus1nk-BDG] > /ip address add address=172.22.0.1/23 interface=ether2<->LAN
[elang@Pus1nk-BDG] > /ip route add gateway=20.20.20.1
[elang@Pus1nk-BDG] > /ip dns set primary-dns=20.20.20.250 secondary-dns=20.20.20.252
[elang@Pus1nk-BDG] > /ip dns set allow-remote-requests=yes
(tunnel-JKT)
[elang@Pus1nk-BDG] > /interface eoip add name=EoIP-JKT<->BDG remote-address=10.10.10.6 tunnel-id=22
[elang@Pus1nk-BDG] > /ip address add address=10.20.30.2/30 interface=EoIP-JKT<->BDG
[elang@Pus1nk-BDG] > /ip route add dst-address=172.22.0.0/23 gateway=10.20.30.1

Setting Ro. Surabaya
[elang@Pus1nk-BDG] > /interface set ether1 name=ether1<->WAN
[elang@Pus1nk-BDG] > /interface set ether2 name=ether2<->LAN
[elang@Pus1nk-BDG] > /ip address add address=30.30.30.2/30 interface=ether1<->WAN
[elang@Pus1nk-BDG] > /ip address add address=172.31.0.1/23 interface=ether2<->LAN
[elang@Pus1nk-BDG] > /ip route add gateway=30.30.30.1
[elang@Pus1nk-BDG] > /ip dns set primary-dns=30.30.30.250 secondary-dns=30.30.30.252
[elang@Pus1nk-BDG] > /ip dns set allow-remote-requests=yes
(tunnel-JKT)
[elang@Pus1nk-BDG] > /interface eoip add name=EoIP-JKT<->SBY remote-address=10.10.10.11 tunnel-id=22
[elang@Pus1nk-BDG] > /ip address add address=10.20.30.6/30 interface=EoIP-JKT<->SBY
[elang@Pus1nk-BDG] > /ip route add dst-address=172.31.0.0/23 gateway=10.20.30.5


Silahkan mencoba sendiri . . . .